![]() ![]() Interestingly the load times for the above libraries is about 17 seconds. Initial loading and config of the channel took about 110 seconds.Ģ) With a SEDNA PCIe SATA card installed in a x4 lane with x4 Samsung M.2 SSD 1TB modules in RAID 0, we get around 960MB/sec Read and 700MB/sec Write. To load the above samples takes around 16 seconds. Its a pricey solution though (around £2100 for the PCIe card and x4 1TB SSD modules). We're seeing around 5GB/sec read/write times. Kontakt5 was set to use memory server, with automatic sample management, and multi-processor management was turned off.ġ) Fastest method we've found here, is to install a MacPro 5,1 with an Artemis PCIe card in x16 lane, and install x4 Samsung SM961 SSD NVME modules configured in RAID 0 using SoftRAID LITE software. For each of the 3 storage solutions (see below), we've created 3 different channels, loading the samples from the 3 different sources each time. We've then started VEP6, created an empty VEP6 project and loaded the channel (with the above samples). So, we have preloaded a VEP6 channel with the above samples, save the channel, and then closed VEP6. Chris Hein Solo Strings (ContraBass, Cello, Viola, Violin). Spitfire Albion ONE Orchestra (Brass High / Low / Medium), Woods (High, Low), Strings. A little experiment we did with a MacPro 5,1 (12 core x2 3.46GHz CPUs, 96GB RAM) over the weekend to compare speeds with 3 storage mediums, where we have loaded the following samples each time in to a VEP6 channel:
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |